top of page

Insert Moulding vs CNC Terminal Insertion: When Should You Fit the Pins?

Louise
6 days ago
4 min read

With insert moulding, the metal terminals are placed in the tool before plastic is moulded around them. With CNC terminal insertion, the housing is moulded first and the terminals are fitted in a separate operation. The right choice depends on where the pins need to sit, how they must be retained and what you need to inspect or test on the finished component.


A connector can look much the same whichever route is used. The differences become clear when you look at what the component has to do in the assembly. Which surfaces locate it? How much of each terminal must remain exposed? What loads will the pins see when the connector is fitted or unplugged? Those are the questions worth answering before committing to tooling.


When does insert moulding make sense for electrical terminals?


Insert moulding is worth considering when the housing needs to capture part of the terminal within the moulded plastic. The tool locates the terminals before injection, and the polymer forms around the areas designed to retain them. If the moulded part already incorporates the terminals, the design may avoid a separate insertion operation.


The tool must hold the terminals in the right position as the plastic flows around them. Contact areas that need to remain exposed must also stay clear of plastic. These requirements affect terminal geometry, how the inserts are loaded and what needs to be checked after moulding.


If you’re still comparing different ways of combining plastic and metal, see our guide to insert moulding and overmoulding.


When is CNC terminal insertion the better route?


CNC terminal insertion is worth considering when the housing can be designed to receive the terminals after moulding. It can also be useful when several product variants share a housing but use different terminal positions or configurations. Whether a common housing is practical depends on the part design and the requirements for each variant.


The housing must support the terminal during insertion and hold it in the correct position afterwards. Features such as the entry geometry, the fit between the pin and housing, and the required insertion depth should be reviewed together. Where retention relies on an interference fit, the design needs to hold the terminal securely without damaging the housing during insertion. Explore Total Precision’s CNC pin and terminal insertion capabilities.


A worked example for a multi-pin connector housing


Imagine an OEM is specifying a plastic connector housing with six terminals. The exposed ends must align with a mating connector, and the terminals must stay in position when that connector is fitted and removed.


With insert moulding, the review starts with how the tool will locate all six terminals and keep the mating ends clear while the plastic is injected. The inspection plan would consider the position of the exposed terminals relative to the housing features that locate the mating connector.


With post-mould insertion, the review starts with the moulded slots or holes, how the housing will be supported during insertion and how the terminal depth will be controlled. If a second version uses four of the six positions, it’s worth investigating whether the same housing could serve both variants.


In either case, a dimension for pin spacing tells only part of the story. The mating connector has to fit, the terminals need to stay seated in use, and the supplier needs a practical way to verify those requirements in production.


What should you compare before committing to tooling?


  • Pin position and exposed length. Identify which dimensions control fit with the mating part. Show where those measurements should be taken from on the drawing.

  • Terminal retention. Explain what the pin will experience during assembly and use. If you already have a pull-out or push-out requirement, include the test method and acceptance criteria.

  • Housing and terminal materials. Share the proposed polymer, terminal material and any plating requirements. Flag surfaces that must stay clear of plastic or remain undamaged during assembly.

  • Variants and production volumes. Give expected quantities for each configuration. Compare how each route would handle changes in pin layout, tooling, part handling and inspection as production scales.

  • Inspection and approval. State which dimensional, mechanical or electrical checks the finished assembly needs. If Production Part Approval Process (PPAP) documentation is required, raise it at enquiry stage so the inspection and approval work can be included in the proposal.


What should you send for a terminal insertion or insert moulding quote?


Send the housing and terminal drawings or CAD models, the expected production volumes and a brief explanation of how the finished component is used. If you have a mating part, an existing sample or a drawing that identifies critical dimensions, include that too. Tell us whether you need a loose component, a pinned housing or a finished assembly, as that changes what the quote needs to cover.


Total Precision brings together precision metal pressing, plastic injection moulding, CNC pin and terminal insertion, electro-mechanical assembly, and testing and inspection. If your project involves several of those operations, we can review them together before you commit to a manufacturing route. Explore testing and inspection at Total Precision.


Frequently asked questions


Is CNC terminal insertion the same as insert moulding?


No. CNC terminal insertion fits a pin or terminal into a component after it has been moulded. Insert moulding places the terminal into the tool so the plastic forms around it during moulding.


Can pressed metal terminals be fitted after moulding?


Yes, where the terminal and housing are designed for post-mould insertion. The geometry, fit and required retention should be reviewed together before production.


Is one process more accurate than the other?


Accuracy depends on the design, tooling, process controls and what needs to be measured. Start by defining where the pin must sit relative to the finished housing and mating part, then compare how each route would achieve and verify that position.


Can one housing be used for different terminal configurations?


It may be possible with post-mould insertion if the housing supports each configuration and each finished variant meets its requirements. Review all planned variants before finalising the tool.


Discuss your component with Total Precision


If you’re deciding whether to mould around a terminal or insert it afterwards, share your drawing and tell us what the finished assembly needs to do. We can review the housing, terminal and inspection requirements together and discuss a suitable route for production.


To discuss your component with Total Precision, call 0115 944 0258 or email sales@total-precision.co.uk.



 
 
 

Comments


bottom of page